Nickel Alloy C2000, 2.4675
| Alloy (UNS) | Ni | Cr | Mo | W | Cu | Fe | Carbon |
|---|---|---|---|---|---|---|---|
| C2000® (N06200) | Bal | 22.00-24.00 | 15.00-17.00 | – | 1.30-1.90 | 3.00 max. | 0.010max. |
| Heat Treatment of Finished Parts | |||||
|---|---|---|---|---|---|
| Condition as supplied by Alloy Wire | Type | Temperature | Time (Hr) | Cooling | |
| °C | °F | ||||
| Annealed or Spring Temper | Stress Relieve | 400 – 450 | 750 – 840 | 2 | Air |
| Properties | ||||
|---|---|---|---|---|
| Condition | Approx. tensile strength | Approx. operating temperature | ||
| N/mm² | ksi | °C | °F | |
| Annealed | 700 – 1000 | 102 – 145 | -200 to +400 | -330 to +750 |
| Spring Temper | 1300 – 1600 | 189 – 232 | -200 to +400 | -330 to +750 |
| Melting Point | 1399°C | 2550°F |
| Density | 8.5 g/cm³ | 0.307 lb/in³ |
| Coefficient of Expansion | 12.4 μm/m °C (20 – 100°C) | 6.9 x 10-6 in/in °F (70 – 212°F) |
| Modulus of Rigidity | 79 kN/mm² | 11458 ksi |
| Modulus of Elasticity | 206 kN/mm² | 29878 ksi |
| STANDARD | WERKSTOFF NR. | UNS | AWS |
|---|---|---|---|
| Hastelloy C2000 | 2.4675 | N06200 | AWS 055 |
Hastelloy C2000 round bar Specification
| Grade | Hastelloy C2000 – UNS N06200 |
|---|---|
| Specification | ASTM B574 UNS N06200 , ASTM B574 / ASME SB574 |
| Standard | ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS ASTM B166, ASTM B160, ASTM B164, ASTM B446, ASTM B637, ASTM B408, ASTM B425, ASTM B574, ASTM B335, ASTM B473, ASTM B649 |
| Hastelloy C2000 Round bar size | Diameter: 3mm~800mm |
| Hastelloy C2000 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Hastelloy C2000 Square bar size | 4mm*4mm~100mm*100mm |
| Hastelloy C2000 Flat bar size | Thickness: 2mm~100mm |
| Width: 10mm~500mm | |
| Hastelloy C2000 Hex Bar size | 2mm~100mm |
| Hastelloy C2000 Billet Size | 1/2″ to 495mm Diameter |
| Hastelloy C2000 Rectangles Size | 33mm x 30mm to 295mm x 1066mm |
| Hastelloy C2000 Round Bar Standard Dimensions | As the customer required |
| Finish | Bright, Polish, Bright, Rough Turned, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| Condition | Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar |
| Technique | Hastelloy C2000 Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
| Form | Round, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Bar, Angle, Channel Bar, Profiles, Forging Etc. |
